Welcome to Qinsun Instruments Co., Limited.
- +86-21-6780 0179 |
- info@qinsun-lab.com |
- Customer Services
During the daily operation of the universal tractor, many problems occur, the most common ones are as follows:
1. Connection to the computer software After that, a prompt message will appear , indicating overload.
The solution is to check if the communication line between the computer and the universal tractor is broken; to check whether the online selection sensor is correctly selected; whether the calibration or calibration function of the software was used before the problem occurred; check whether the calibration value, calibration value or other information in the hardware parameters has been changed manually.
2. The universal tractor's main power is off and cannot move up and down.
The solution is check Check whether the Universal tractor connected power line is connected normally; check if the emergency stop button is twisted; check whether the power supply voltage connected to the universal tractor is normal; check if the fuse on the machine socket is blown, please take out the spare fuse and install it immediately.
3. The main unit of the universal traction machine has power, but the equipment cannot move up and down.
The solution is to check if the device cannot be moved after 15 seconds (time) because the host has to do a self-check at power-on, which takes about 15 seconds; check whether the upper and lower limits are in the correct position, there is some margin for operation; check whether the power supply voltage connected to the testing machine is normal.
I hope that the above inhalt is helpful for your daily operation of the universal tractors.
Wuhan Guoliang Instrument specializes in manufacturing electronic tensile testing machine, universal tensile testing machine and other tests The instrument's traction machine manufacturers include the detectable materials: rubber, plastic, metal, geotextile, etc. Welcome to the consultation!
