Fabric Friction Electric Charge Density Tester

FFriction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge.This equipment is used to determine the electrostatic characteristics of friction-charged fabric under lab conditions.

Standards：

JIS L-1094;
JIS T-8118;
ZB W 04008-89;
GB / T12703.2-2009;
GB 12014-2009;
GB / T23316-2009
Fabric

Specifications：

Electrostatic charge test range: 0-2uc, accuracy: plusmn;0.001uc
Nylon or acrylic friction cloth size: 400mmtimes;450mm
Sample size: 250mmtimes;350mm,each 3pcs in vertical amp; zonal
Running condition: Running time 5min, roller inside temperature: 60plusmn;100C

Rolling friction machine specs:

Term	Spec	Term	Spec
Roller dia.	ge;460mm	Roller dia.	ge;280mm
Depth	ge;350mm	Roller rotation rate	ge;45r/min
Vane number	3	Roller liner material	Nylon, polypropylene standard cloth
Heating mode	Electric heating	Exhaust capacity	ge;2m3/min
Others	Double-sided tape with sample in-out place

Friction Charging Tester Main accessories:

Voltage meter (R8240): 1 set
Capacitor: 1 set
Cable (A01009-200): 1 root
Connection cable (A01009-50): 1 root
Power supply-type strip in addition to the electrode: 1 root
Friction abutment / ground pad (nylon friction cloth): 1 set
Insulated rods (20Phi; x 500L mm acrylic clear fiber): 1 root
Certificate of proof of voltage meter (traceability): 1 book

Friction Charging Tester Note:

1, the system of Faraday tube outer cylinder should be reliably grounded.
2. Clear the charge amount measurement unit before each measurement.
3, the measured object must be measured from the power supply.
4, before the test, please turn on the power switch to make the machine warm up for 15 minutes.
5, voltage / current generator is not to sell goods.