Welcome to Qinsun Instruments Co., Limited.

Single Fiber Strength Tester

info@qinsun-lab.com Get Quote

  • Introduction48WTextile Testing Instruments, Testing Equipment Manufacturer
    In the tensile test, the measured fiber is sandwiched between the upper holder and the lower holder. According to the panel operation instruction, the monitoring and control program generates the step pulse by the pulse generator , moves up and down the holder by the stepping motor and the transmission mechanism, and reads the number of the step pulse from the reversible counter to complete the elongation measurement.48WTextile Testing Instruments, Testing Equipment Manufacturer
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    The load of the measured fiber is generated by the transmission mechanism on the load force sensor. The output signal is passed through the amplifier and the analog-to-digital converter, and the load measurement is completed by reading the conversion result from the monitoring and control program.48WTextile Testing Instruments, Testing Equipment Manufacturer
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    Application48WTextile Testing Instruments, Testing Equipment Manufacturer
    The single fibers are stretched to break on a constant elongation extensometer (CRE) under specified conditions. The values of tensile strength, elongation at break, elongation strength, and initial modulus of the specimen obtained from the load-elongation curve or the data display acquisition system are suitable for the tensile test of chemical fiber and natural fiber Stretch performance test.48WTextile Testing Instruments, Testing Equipment Manufacturer
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    Standards48WTextile Testing Instruments, Testing Equipment Manufacturer
    IOS21120 Synthetic fibers for cement, cement mortar and concrete48WTextile Testing Instruments, Testing Equipment Manufacturer
    IOS14337 Testing method for tensile properties of man-made staple fibers48WTextile Testing Instruments, Testing Equipment Manufacturer
    ISO 5079 Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres48WTextile Testing Instruments, Testing Equipment Manufacturer
    IOS13835.5 Test method for rabbit hairmdash;Part 5:Breaking tenacity and elongation at break of single fibre 48WTextile Testing Instruments, Testing Equipment Manufacturer
    ASTM D3822(M) Standard test method for tensile properties of single textile fibers48WTextile Testing Instruments, Testing Equipment Manufacturer
    JIS L1015 Testing methods for man-made staple fibres48WTextile Testing Instruments, Testing Equipment Manufacturer
    ASTM D1294/2524/3106/3217/1445 Method of test for breaking tenacity of wool fiber bundles48WTextile Testing Instruments, Testing Equipment Manufacturer
    DIN53843-2 Testing of textilesndash; Loop tensile test for staple fibres48WTextile Testing Instruments, Testing Equipment Manufacturer
    ISO3060 Textiles -- Cotton fibres -- Determination of breaking tenacity of flat bundles48WTextile Testing Instruments, Testing Equipment Manufacturer
    BS5116、BS 4029 Hexagon socket screws and wrench keys: metric series mdash;Part 5: Specification for hexagon socket set screws with cup point48WTextile Testing Instruments, Testing Equipment Manufacturer
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    Technical Parameters
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    Items Standard48WTextile Testing Instruments, Testing Equipment Manufacturer
    requirements
    Design48WTextile Testing Instruments, Testing Equipment Manufacturer
    requirements
    Implementation48WTextile Testing Instruments, Testing Equipment Manufacturer
    methods
    Load range According to the maximum load48WTextile Testing Instruments, Testing Equipment Manufacturer
    requirements of the specimen
    0-100cN Outsourcing, pressure sensor
    Load error plusmn;1% le;plusmn;1% Sensor validity
    Load resolution 0.1cN 0.1cN Sensor accuracy
    Elongation range 100mm 100mm Outsourcing,48WTextile Testing Instruments, Testing Equipment Manufacturer
    displacement sensor
    Elongation error 0.05,0.1mm le;0.01 Sensor validity
    Elongation resolution 0.1% 1% Sensor accuracy
    Clamp distance 2-20mm 1-20mm Machining
    Lower gripper descent speed 5-20mm/min 1-100mm/min Outsourcing, stepper motor
    Lower gripperstroke 100mm 100mm Machining
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    Accessories48WTextile Testing Instruments, Testing Equipment Manufacturer
    48WTextile Testing Instruments, Testing Equipment Manufacturer
    The device can indicate or record the load applied to the specimen and the corresponding elongation value; (Force sensor)48WTextile Testing Instruments, Testing Equipment Manufacturer
    The device can make load-elongation curve; (Integrated software)48WTextile Testing Instruments, Testing Equipment Manufacturer
    The gripper suitably holds a single fiber at the desired nominal gauge length; (Manual, pneumatic and electric. The pneumatic gripper avoids the influence of the measurement of the force sensor and also reduces the degree of damage to the special brittle material during the clamping process.)48WTextile Testing Instruments, Testing Equipment Manufacturer
    The device has a different stretching speed; (Stepper motor)48WTextile Testing Instruments, Testing Equipment Manufacturer
    The device is used to wet the fibers in a wet state experiment so that the fibers are immersed during the test without affecting the test results; (Containers)48WTextile Testing Instruments, Testing Equipment Manufacturer
    The device is used to precisely calibrate the instrument.

Get a Quote

Your email address will not be published. Required fields are marked *