UV aging tester is installed with 8 UV lamps on both sides of the chamber; the number of sample holder fixtures: 20; the size of sample holder fixtures: 404times;105 (mm); the heating method is internal water tank heating, with fast heating and uniform temperature distribution; the drainage system uses back vortex type and U-type accumulation device for drainage; the distance between the surface of the sample and the plane of UV lamps is 50 mm and parallel to each other; the actual The working chamber consists of test sample and bracket forming the inner wall of the chamber, ladder shape; the inner water level is automatically refilled; the lid of the chamber is two-way flip type, easy to open and close; the bottom of the test chamber adopts high-quality fixed PU movable wheels. It is suitable for the aging test of non-metallic materials against sunlight and artificial light source.aomTextile Testing Instruments, Testing Equipment Manufacturer aomTextile Testing Instruments, Testing Equipment Manufacturer UV aging test chamber structure: the chamber adopts CNC machine tool processing molding, beautiful and generous shape, the lid is two-way flip type, easy to operate. The inner chamber adopts imported stainless steel plate, and the outer chamber adopts A3 steel plate spraying, which increases the appearance of texture and cleanliness. Heating method for the inner liner sink type heating, heating up fast, temperature distribution evenly.aomTextile Testing Instruments, Testing Equipment Manufacturer aomTextile Testing Instruments, Testing Equipment Manufacturer Control system: the use of blackboard temperature meter control heating, the temperature is more stable. Radiometer probe (optional) is fixed, no need to load and unload each time. Radiation using high-precision display and measurement of ultraviolet irradiation meter. The irradiance is not more than 2W/㎡. Light and condensation can be controlled independently can be alternately cycled control. The independent control time of light and condensation and the alternate cycle control time can be set within one thousand hours. Automatic detection of the UV lamp light state, and intuitive display of which row which one. Manual adjustment of irradiance and automatic adjustment of irradiance can be realized (optional function).aomTextile Testing Instruments, Testing Equipment Manufacturer aomTextile Testing Instruments, Testing Equipment Manufacturer Maintenance methods: In order to UV aging tester work better and maintain a good state for a long time, please maintain the following items: after installation, the equipment and adjacent walls or other equipment to retain sufficient maintenance space between; installation site ambient temperature should not change sharply; equipment in non-working conditions, it should be kept dry, the water discharge after running off, wipe dry studio and box.aomTextile Testing Instruments, Testing Equipment Manufacturer aomTextile Testing Instruments, Testing Equipment Manufacturer UV aging tester is recommended to be placed in a well-ventilated place (it is recommended to install ventilation fans to keep indoor ventilation); avoid should not be installed in dusty places; prohibit chemicals from contacting the equipment (away from combustible materials); the wastewater discharge system of the equipment must be installed in place; after each test, the samples should be taken out and the equipment liner cleaned; after use, the plastic outer cover will be put on. (Keep the appearance of the box neat; avoid dust intrusion into the box).aomTextile Testing Instruments, Testing Equipment Manufacturer
