Wire tensile testing machine refers to the tensile testing machine used for tensile testing of wire, cable and other wires. It can be used for peel, tear, flex, flex, compression and other tests.
Wires, cables and other wires are metallic materials, depending on where they are used, i.e. the thickness will also be different. The thicker the wire, the greater the tensile force, and the thinner the wire, the smaller the tensile force. Therefore, before using the wire tensile testing machine, you must first consider the maximum tensile force that the wire has the testing machine manufactured by the company how much can withstand, and then select the appropriate tensile testing machine according to its maximum tensile force.
There are many types of wire tensile testing machines on the market. If you want to check the wire, you need to pay attention to the following points:>
1. As already eMentions at the beginning of the article, the wire What is the maximum tensile force it can withstand? This is the measurement range of the tensile testing machine. The general measurement range of the metal tensile test is over 5000N, but considering the characteristics of the wire, it can be adjusted accordingly, as long as the measurement range can meet the needs of the company.
2. Different products have different tensile machine brackets for different tests. For example, the fabric tensile test bracket is clamped by the rail, and the steel plate is used for the compression test. Three points of compression strength, etc., so the corresponding fixture is also needed to check the tensile strength of the wire.
3. In addition to passing the tensile test, the company's wire products must also meet the relevant national standards. For specific standards see National Standard Full Text Disclosure> .
The above is theDescription of Wire Tensile Testing Machine: http://www.whglyq.com/gongsixinwen/857 published by the publisher of Guoliang Instrument.