Pull Test Machine> is also referred to as the button snap pull tester. It is mainly used as a textile testing machine or a toy testing machine intended to determine the breaking or pull strength of buttons, snaps, fasteners, ornaments, etc,. attached to garments, fabrics, toys, shoes, etc.
Button pulls test is employed to work out the pulling strength of any sort of button and snaps utilized in garments. it's also wont to determine the holding or breaking strength of prong ring attached snap fasteners onto garments to make sure the button fixed on the clothes product properly.
Generally speaking, buttons intended for the child wear should withstand a minimum pull of 90N, while button products designed for the adult clothing should withstand a minimum pull of 70N.
This snap button pull testing machine is an effective tool to help manufacturers to check whether various attachments of the final products are firmly fastened and reach the specified requirements. If the buttons on the baby clothes are easy to fall off, which is not only a quality problem but also a hazard of being swallowed by the baby in contact. Therefore, all buttons and decorative parts on garments must be tested with a button snap pull tester machine> in the product development stage and during the spot check on finished products to check whether their firmness meets relevant safety standards.
Button snap pull tester, to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a button pull tester applies for compression and tensile testing of small samples(special attachments are available). The button pull test standard includes ASTM PS79-96, ASTM F963, EN 71-1, etc. Snap tester will help you a lot when you do push and pull test.
Snap Tester (button pull test machine), to determine the holding or breaking strength of prong-ring attached snap fasteners onto garments or toys, also as a Push Pull Tester for compression and tensile testing of small samples(special attachments are available).
This snap button pull test machine> consists of an upper snap clamp, a lower fabric clamp and force gauge mounted on a stand, a hand wheel on the bottom of snap tester, all these fasteners pull out test equipment which allows fine control with convenient operation, which makes the pull out test equipment very easy to use.
The snap component is gripped by the Upper Snap Clamp and the garment is fixed to the lower Fabric Clamp. By turning the hand wheel, the operator can apply a specific force and the holding force or the breaking strength can be recorded. The capability of the snap tester can be enhanced with clamps accessories for testing of other Snaps, Jean Buttons, Four Hole Buttons Garments Accessories such as Zippers, Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others, beyond these, you will find more applications for this push pull test equipment> for your testing purpose.
Button pulls test is used to determine the pulling strength of any type of button and snaps used in garments. It is also used to determine the holding or breaking strength of prong ring attached snap fasteners onto garments to ensure the button fixed on the garments product properly.
Chinese button pull test machine supplier, be your trusted work partner. Top Rated Service. Factory Direct Supply. Trade Assurance. The Trusted Manufacturer. Types: abrasion tester, flammability tester, textile tensile tester, martindale tester.
instruments> is a national high-techenterprise engaged in RD and production of high precision physical properties testing equipment with 20+ years experience, expertly specialized in providing integrated laboratory testing solutions for children's products, textile, footwear and furniture.
QINSUN is a textile testing equipment manufacturers> which integrates research devolepment, prodution and sales in one. So far, QINSUN owns two production factories and four sales teams for textile tester, footwear tester, Mask Tester and Protective Clothing Tester, Lab Incubator, Biological Safety Cabinet, Lab Oven etc.